Aluminium-butyl sealing sleeves

accessories

Primer 250 ml, solvent-free
Artikel-No. 9000-02
  • The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
  • Contents: 250 ml

similar

Aluminium-butyl sealing sleeve
Artikel-No. 9079-44
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-46
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-47
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-48
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-49
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-51
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-52
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-53
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-54
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-55
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve, Ø 12 – 15 mm
Artikel-No. 9079-56
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece

Aluminium-butyl sealing sleeves

For permanent, secure sealing of installation penetrations through masonry, concrete or wooden materials. The highly-elastic sleeves are fitted with non-tear aluminium butyl adhesive flanges and provide maximum adhesion. Some surfaces must be pre-treated with KAISER primer.
  • Permanently moisture-proof - for use indoors and outdoors
  • Water-sealing effect with non-pressing water up to 0.02 bar
  • Especially suitable for sealing in the cellar socle.
  • Large contact area to cables and conduits
  • Anti-kink sleeve also permanently seals very kinked cables
  • Completely toolless wall installation
  • Extremely good adhesion

Installation

Pre-treat mineral bases and fibreboards with primer (Article No. 9000-02).
Pre-treat mineral bases and fibreboards with primer (Article No. 9000-02).
Pull the sleeve over the cable/conduit and remove the protective foil.
Pull the sleeve over the cable/conduit and remove the protective foil.
Press the adhesive flange of the sleeve firmly into Position.
Press the adhesive flange of the sleeve firmly into Position.

Dimensions / Form

Product length:
150 mm
Product width:
150 mm
Product depth:
30 mm

Connections / Entries

Type of entry:
electric cable
Number of entries:
2
Wire entry Ø min.:
4 mm
Wire entry Ø max.:
8 mm

Assembly / Installation

Assembly type:
HW (drywall/lightweight construction)

Safety / Properties

air tightness:
Yes
Instruction

Air-tight sleeve

Assembly instructions

1.3 MB | 11/03/2024
Energy efficiency.
Brochure

Energy efficiency.

Electrical installation for energy-saving buildings.

6.1 MB
Sealing sleeves
Flyer

Sealing sleeves

Reliable sealing of installation feed-throughs.

2.8 MB
Primer 250 ml, solvent-free
Artikel-No. 9000-02
  • The self-adhesive primer is water and heat resistant. It can also be used on Styrofoam, EPS, XPS etc.
  • Contents: 250 ml
Aluminium-butyl sealing sleeve
Artikel-No. 9079-44
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-46
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-47
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-48
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-49
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-51
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-52
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-53
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-54
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve
Artikel-No. 9079-55
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece
Aluminium-butyl sealing sleeve, Ø 12 – 15 mm
Artikel-No. 9079-56
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • pressing water up to 0.02 bar
  • Self-adhesive.
  • 1-piece