Company
Service
Media library
News
Career
Contact
KAISER GROUP
Go back
B² one-gang junction boxes
NEW
Open Cadenas Modal
  • for in-factory installation
  • Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
  • 1-piece
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm

Concrete construction B² one-gang junction box, with slot for system adhesive magnet, 1-piece, depth 83.5 mm
One-gang junction box for concrete construction installation, precast concrete, fixing to steel formwork using system adhesive magnet (1299-69 or 1299-70)
Concrete construction box, designed as a concrete construction one-gang junction box in accordance with DIN EN 60670/VDE 0606 and DIN 49073, made of plastic, with slot for system adhesive magnet
Installation opening Ø 60 mm, length 77 mm, width 76 mm, depth 83.5 mm, conduit entry by punching out with conduit connector, with integrated conduit retention, front part can be swung out, can be connected in a row with a torsion-proof combination distance of 71 mm without device screws, fully insulated cable transition, with 4 screw domes and 2 expanding claw fields, without device screws
Insertion markings for electrical installation conduits (4 x 32 mm/40), Insertion markings for electrical installation conduits (4 x 16 mm) and insertion markings for cables and electric cables (8 markings up to Ø 16 mm), protection class IP 30 according to DIN EN 60529, flame-retardant according to DIN EN 60695 up to 650° C, halogen-free in accordance with DIN VDE 0604-2-100, for concrete construction installation precast concrete
Read more Read less

B² one-gang junction box for system magnet, depth 83.5 mm

Kaiser GmbH & Co.KG
Artikel-No.: 1264-06
EAN: 4013456552739
VDE
OEVE
Product depth: 83.5 mm
Number of entries: 6
For conduit Ø: 32 mm, 40 mm
Cover for box/housing/casing Ø: 60 mm
Shipping: 100
Price (MSRP) / 100 ST:
€335.00
Price group: 140
More product details
Datasheet (PDF)

accessories

NEW
- für die lagerichtige Positionierung bei automatisierter oder manueller Fertigung - mit Verdrehsicherung für Gerätedosen - Haftkraft 500 N (50 kg) - Verwendbar für folgende Artikel: - HaloX® Einbaugehäuse / Art.-Nr. 1282-74/-75/-76 und 1283-74/-76 - B² Geräte-Verbindungsdosen / Art.-Nr. 1262-06, 1263-06, 1264-06 - Plattendecken-Großdose 115 / Art.-Nr. 1227-16 - End-und Übergangstüllen / Art.-Nr. 1261-82/-83/-84 - Wand- und Deckenkrümmer 30° / Art.-Nr. 1261-92/-93/-94
System magnet
Artikel-No. 1299-69
  • for accurate positioning during automated or manual production
  • with an anti-twist device for one-gang boxes
  • adhesive force 500 N (50 kg)
  • Can be used for the following articles:
  • HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
  • B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
  • 115 large slab ceiling box / item no. 1227-16
  • End and transition bushes / item no. 1261-82/-83/-84
  • Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
See more
NEW
- für die lagerichtige Positionierung bei automatisierter Fertigung sowie automatisierter Entnahme und Magazinierung - mit Verdrehsicherung für Gerätedosen - Haftkraft 500 N (50 kg) - Verwendbar für folgende Artikel: - HaloX® Einbaugehäuse / Art.-Nr. 1282-74/-75/-76 und 1283-74/-76 - B² Geräte-Verbindungsdosen / Art.-Nr. 1262-06, 1263-06, 1264-06 - Plattendecken-Großdose 115 / Art.-Nr. 1227-16 - End-und Übergangstüllen / Art.-Nr. 1261-82/-83/-84 - Wand- und Deckenkrümmer 30° / Art.-Nr. 1261-92/-93/-94
System magnet PLUS
Artikel-No. 1299-70
  • for correct positioning during automated production as well as automated removal and storage
  • with an anti-twist device for one-gang boxes
  • adhesive force 500 N (50 kg)
  • Can be used for the following articles:
  • HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
  • B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
  • 115 large slab ceiling box / item no. 1227-16
  • End and transition bushes / item no. 1261-82/-83/-84
  • Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
See more

similar

NEW
- zum werkseitigen Einbau - Aufnahme für System-Haftmagnet (Art.-Nr. 1299-69) und System-Haftmagnet PLUS (Art.-Nr. 1299-70) - 1-teilig - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm
B² one-gang junction box for system magnet, depth 48.5 mm
Artikel-No. 1262-06
  • for in-factory installation
  • Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
  • 1-piece
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
See more
NEW
- zum werkseitigen Einbau - Aufnahme für System-Haftmagnet (Art.-Nr. 1299-69) und System-Haftmagnet PLUS (Art.-Nr. 1299-70) - 1-teilig - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm
B² one-gang junction box for system magnet, depth 68.5 mm
Artikel-No. 1263-06
  • for in-factory installation
  • Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
  • 1-piece
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
See more

B² one-gang junction boxes

The new B² one-gang junction boxes for precast concrete offer plenty of space for terminals and cables thanks to their large volume and ease of assembly. The version with a slot for the system magnets (Art.-Nr. 1299-69) or system magnet PLUS (Art. No. 1299-70) is perfect for quick attachment to system magnets that have already been set automatically. Multiple combinations with a standardised combination distance of 71 mm can be created quickly and easily using the connection options on the side of the B² one-gang junction boxes. The separately available conduit connectors for toolless conduit connection prevent concrete from flowing in and, at the same time, dampen conduit vibrations during the compaction process.
  • For in-factory installation
  • Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece

Fixing variant

B² one-gang junction boxes with holder for KAISER system magnets (Art. No. 1299-69 / 1299-70).
B² one-gang junction boxes with holder for KAISER system magnets (Art. No. 1299-69 / 1299-70).
B² one-gang junction boxes without plaster skin with holder for the magnet (Art. No. 1261-81).
B² one-gang junction boxes without plaster skin with holder for the magnet (Art. No. 1261-81).
B² one-gang junction boxes with plaster skin to hold the adhesive foil (Art. No. 1219-00)...
B² one-gang junction boxes with plaster skin to hold the adhesive foil (Art. No. 1219-00)...
...or by means of hot glue.
...or by means of hot glue.

Product advantages

The conduit connectors buffer the vibrations that occur between the conduit and the box during the compression process…
The conduit connectors buffer the vibrations that occur between the conduit and the box during the compression process…
...and at the same time securely seal the connection in any position.
...and at the same time securely seal the connection in any position.
Combination of two B² one-gang junction boxes...
Combination of two B² one-gang junction boxes...
...fixed to the steel formwork using a system magnet.
...fixed to the steel formwork using a system magnet.

Conduit connectors Ø 20/25 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 20/25 mm.
With built-in conduit lock designed especially for corrugated conduits with a diameter of 20/25 mm.
Snap the conduit connector in to the one-gang junction box.
Snap the conduit connector in to the one-gang junction box.
Press the conduit connector downwards and completely punch out the feed-through.
Press the conduit connector downwards and completely punch out the feed-through.
Insert the conduit into the conduit connector.
Insert the conduit into the conduit connector.

Conduit connectors Ø 32/40 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 32/40 mm.
With built-in conduit lock designed especially for corrugated conduits with a diameter of 32/40 mm.
Insert the tip of the conduit connector in the marked position.
Insert the tip of the conduit connector in the marked position.
Turn the conduit connector with pressure against the one-gang junction box until the feed-through is cut out.
Turn the conduit connector with pressure against the one-gang junction box until the feed-through is cut out.
Snap-in the conduit connector, insert the conduit into the conduit connector.
Snap-in the conduit connector, insert the conduit into the conduit connector.

Conduit connector 60° / diameter 25 mm

Snap the two halves of the 60° conduit connector together.
Snap the two halves of the 60° conduit connector together.
Pierce the tip of the 60° conduit connector at the desired conduit entry and turn until the feed-through is cut out.
Pierce the tip of the 60° conduit connector at the desired conduit entry and turn until the feed-through is cut out.
Insert the conduit in engaged conduit connector 60°.
Insert the conduit in engaged conduit connector 60°.
3-unit combination with inserted conduits in the wall area.
3-unit combination with inserted conduits in the wall area.

Conduit transition coupling Ø 32 mm – Application examples

With built-in conduit lock designed especially for corrugated conduits with a diameter of 32 mm.
With built-in conduit lock designed especially for corrugated conduits with a diameter of 32 mm.
Push the nose of the conduit transition coupling at the marking of the box and turn it with pressure against the B² one-gang junction box until the feed-through is cut out.
Push the nose of the conduit transition coupling at the marking of the box and turn it with pressure against the B² one-gang junction box until the feed-through is cut out.
The conduit transition coupling directs the inner diameter of the conduit unrestricted into the B² one-gang junction boxes Art. No. 1262-XX and 1263-XX...
The conduit transition coupling directs the inner diameter of the conduit unrestricted into the B² one-gang junction boxes Art. No. 1262-XX and 1263-XX...
...and thus enables the secure conduit connection of two Ø 32 mm conduits from one direction.
...and thus enables the secure conduit connection of two Ø 32 mm conduits from one direction.

Dimensions / Form

Product depth:
83.5 mm
Cover for box/housing/casing Ø:
60 mm

Connections / Entries

Number of entries:
6
For conduit Ø:
32 mm, 40 mm

Assembly / Installation

Assembly type:
BB (solid construction)

Safety / Properties

Special application:
precast concrete

Approvals / Certifications

VDE:
Yes
Certificate

Concrete construction boxes - Sound insulation certificate

536.1 KB | 23/01/2023
Download
System magnet
Flyer

System magnet

Solutions for automated precast concrete in concrete construction.

1.4 MB
NEW
- für die lagerichtige Positionierung bei automatisierter oder manueller Fertigung - mit Verdrehsicherung für Gerätedosen - Haftkraft 500 N (50 kg) - Verwendbar für folgende Artikel: - HaloX® Einbaugehäuse / Art.-Nr. 1282-74/-75/-76 und 1283-74/-76 - B² Geräte-Verbindungsdosen / Art.-Nr. 1262-06, 1263-06, 1264-06 - Plattendecken-Großdose 115 / Art.-Nr. 1227-16 - End-und Übergangstüllen / Art.-Nr. 1261-82/-83/-84 - Wand- und Deckenkrümmer 30° / Art.-Nr. 1261-92/-93/-94
System magnet
Artikel-No. 1299-69
  • for accurate positioning during automated or manual production
  • with an anti-twist device for one-gang boxes
  • adhesive force 500 N (50 kg)
  • Can be used for the following articles:
  • HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
  • B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
  • 115 large slab ceiling box / item no. 1227-16
  • End and transition bushes / item no. 1261-82/-83/-84
  • Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
See more
NEW
- für die lagerichtige Positionierung bei automatisierter Fertigung sowie automatisierter Entnahme und Magazinierung - mit Verdrehsicherung für Gerätedosen - Haftkraft 500 N (50 kg) - Verwendbar für folgende Artikel: - HaloX® Einbaugehäuse / Art.-Nr. 1282-74/-75/-76 und 1283-74/-76 - B² Geräte-Verbindungsdosen / Art.-Nr. 1262-06, 1263-06, 1264-06 - Plattendecken-Großdose 115 / Art.-Nr. 1227-16 - End-und Übergangstüllen / Art.-Nr. 1261-82/-83/-84 - Wand- und Deckenkrümmer 30° / Art.-Nr. 1261-92/-93/-94
System magnet PLUS
Artikel-No. 1299-70
  • for correct positioning during automated production as well as automated removal and storage
  • with an anti-twist device for one-gang boxes
  • adhesive force 500 N (50 kg)
  • Can be used for the following articles:
  • HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
  • B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
  • 115 large slab ceiling box / item no. 1227-16
  • End and transition bushes / item no. 1261-82/-83/-84
  • Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
See more
Ausschreiben.de

Ausschreiben.de

Go to tender article
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
NEW
- zum werkseitigen Einbau - Aufnahme für System-Haftmagnet (Art.-Nr. 1299-69) und System-Haftmagnet PLUS (Art.-Nr. 1299-70) - 1-teilig - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm
B² one-gang junction box for system magnet, depth 48.5 mm
Artikel-No. 1262-06
  • for in-factory installation
  • Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
  • 1-piece
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
See more
NEW
- zum werkseitigen Einbau - Aufnahme für System-Haftmagnet (Art.-Nr. 1299-69) und System-Haftmagnet PLUS (Art.-Nr. 1299-70) - 1-teilig - 4 Schraubdome und 2 Spreizkrallenfelder zur Gerätebefestigung - Norm-Kombinationsabstand 71 mm
B² one-gang junction box for system magnet, depth 68.5 mm
Artikel-No. 1263-06
  • for in-factory installation
  • Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
  • 1-piece
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
See more