• Scope of delivery: FO subscriber connection, LC-APC coupling and pre-assembled E3S Connect® fibre optic cable

Surface mounting with E3S Connect® - fibre optic cable for connection to the
fibre optic building distributor (Gf-GV)
Compact fibre optic subscriber connection in glossy signal white for surface mounting. Can be installed directly on the wall or on a flush-mounted device box using electric screws. Suitable for cable entries from the bottom and from the rear with integrated strain relief. Equipped with 2x LC/APC duplex couplings including shutter and dust cover. Additional LC/APC duplex and SC/APC simplex couplings can be used, which can be inserted in two different height positions.
The subscriber connection is delivered with a pre-assembled, high-quality (G.657.A2)
E3S Connect® fibre optic cable in a handy roll-off box, which also meets fire protection class B2ca, s1a, d1, a1 (BauPVo).
The fibre optic cable is also pre-assembled with special E3S Connect® LC/APC connectors per fibre, which allow it to be pulled, blown or pushed into conduits with a minimum diameter of 7 mm.
Subscriber connection properties:
Network level: Building network NE4
Installation type: Surface-mounted on the wall / or on an installation box / multimedia distributor
Protection class: IP20
Impact resistance: IK07
Number of fibres: 4
Number of splice cassettes: 1
Halogen-free: Yes
Loop length (splice cassette): 180 mm
Bending radius (splice cassette) R: = 25 mm
Number of cable entries: 3x
Cable entry Ø: 2.3 – 5.3 mm
Storage temperature range: -10 °C / +60 °C
Installation temperature range: -10 °C / +60 °C
Operating temperature range: -20 °C / +60 °C
Coupling properties:
LC/APC duplex coupling: With flange, SC simplex footprint
Number of couplings: 2
Sleeve material: Ceramic, slotted
Housing material: Plastic, halogen-free, flame-retardant
Laser and dust protection: Integrated protective flap, blind plug
Insertion loss: ≤ 0.20 dB
Mating cycles: 1,000
Fibre optic cable properties
Fibre class: Single mode OS2 (G.657.A2)
Fibre type: Fiber-BrightCore® single mode optical fibre
Fibre colour coding: 4 fibres: 1=red, 2=green, 3=blue, 4=yellow
Stranding element: Aramid yarn, 2x central strength members
Material: LSZH, IEC 60332-1/-2
BauPVo B2ca-S1 in accordance with EN50575:2014 + A1:2016
Sheath thickness: 2.00 – 2.40 mm
Cable Ø: 2.00 – 2.40 mm
Cable labelling: KAISER FTTH E3S Connect System Cable 2E9/125 G657A2 CPR B2ca DOP 12013034
Minimum bending radius: 40 mm (installation) // 10 mm (permanent)
Tensile force: 250 N (installation) // 100 N (permanent)
Compressive strength: 1000 N / 10 cm
Storage temperature range: -40°C / +85°C
Installation temperature range: -20°C / +60°C
Operating temperature range: -40°C / +80°C
Cable length: 15 m
E3S connector properties
Connection on Gf-TA: E3S Connect® – LC/APC
Pigtail length on Gf-TA: approx. 50 cm Stepped connector
Connection on Gf-GV: E3S Connect® – LC/APC
Pigtail length on Gf-GV: approx. 100 cm Stepped connector
Material: Plastic, halogen-free, flame-retardant
Insertion loss: ≥ 0.12dB Ø - ≤ 0.25dB Max. (Grade B)
Return loss: ≥ 70 dB (Grade B)
Mating cycles: 1,000
Ferrule Ø: 1.25 mm, ceramic, axially spring-loaded
Strain relief: ≥ 100 N
Laser and dust protection: Blind plug
Standard (design specification): IEC 61754-20
Storage temperature range: -40°C / +85°C
Installation temperature range: -20°C / +60°C
Operating temperature range: -40°C / +80°C