• E3S Connect® patch cable, 2x fibres, duplex, L=3m

E3S Connect® connection cable between the house transfer point (HÜP / Gf-AP)
and the fibre optic building distributor (Gf-GV)
High-quality 2-fibre fibre optic patch cable (G.657.A2), which also complies with
fire protection class B2ca, s1a, d0, a1 (BauPVo).
Connection at the house connection point (HÜP / Gf-AP) with standard LC/APC connector.
Connection at the fibre optic building distributor with E3S Connect® - LC/APC connector
Fibre optic cable properties
Network level: Building network NE4
Fibre class: Single mode OS2 (G.657.A2)
Fibre type: Fibre-BrightCore® single mode optical fibre
Fibre colour coding: 2 fibres: 1=red, 2=green
Stranding element: Aramid yarn, 2x central strength members
Material: LSZH, IEC 60332-1/-2
BauPVo B2ca-S1 in accordance with EN50575:2014 + A1:2016
Sheath thickness: 2.00 – 2.40 mm
Cable Ø: 2.00 – 2.40 mm
Cable labelling: KAISER FTTH E3S Connect System Cable 2E9/125 G657A2 CPR B2ca DOP 12013034
Minimum bending radius: 40 mm (installation) // 10 mm (permanent)
Tensile force: 250 N (installation) // 100 N (permanent)
Compressive strength: 1000 N / 10 cm
Storage temperature range: -40°C / +85°C
Installation temperature range: -20°C / +60°C
Operating temperature range: -40°C / +80°C
Cable length: 3 m
E3S connector properties
Connection on HÜP standard – LC/APC
Whip length on HÜP approx. 7 cm Connector (straight, not stepped)
Connection on Gf-GV E3S – LC/APC
Whip length on Gf-GV approx. 100 cm Stepped connector
Material Plastic, halogen-free, flame-retardant
Insertion loss ≥ 0.12dB Ø - ≤ 0.25dB Max. (Grade B)
Return loss ≥ 70 dB (Grade B)
Mating cycles 1,000
Ferrule Ø 1.25 mm, ceramic, axially spring-loaded
Strain relief ≥ 100 N
Laser and dust protection Blind plug
Standard (design specification) IEC 61754-20
Storage temperature range -40°C / +85°C
Installation temperature range -20°C / +60°C
Operating temperature range -40°C / +80°C