Each flush-mounted junction box has a large number of break-out conduit inlets. They are equally suitable for use with flexible plastic conduits of the corrugated (KRFG) or the smooth (KRF) type. The electrician can easily and quickly insert the conduits into the box or pull them through.
Flush-mounted junction boxes for flexible plastic conduits (KRF or KRFG)
Flush-mounted junction box - 76mm
Product length:
115 mm
Product width:
115 mm
Product depth:
76 mm
For conduit Ø:
20 mm, 25 mm
Shipping:
50
Price (MSRP) / 100 ST:
€915.00
Price group:
130
accessories
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.22
- Conforms to EN 60670-1
- UV-resistant
Extension piece - 13mm - for junction box
Artikel-No.
9908.68
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.10
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with central fixing, RAL 9010
Artikel-No.
9909.20
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Waterproof cover
Artikel-No.
9909.03
- with full neoprene seal
- Cover fixing with enclosed screws, non-rusting
Extension piece - 45mm - for junction box
Artikel-No.
9908.68.45
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
similar
Flush-mounted junction box - 101mm
Artikel-No.
9908.01
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 145mm
Artikel-No.
9908.01.21
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 150mm
Artikel-No.
9908.21
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction boxes for flexible plastic conduits (KRF or KRFG)
Dimensions / Form
- Product length:
- 115 mm
- Product width:
- 115 mm
- Product depth:
- 76 mm
Connections / Entries
- For conduit Ø:
- 20 mm, 25 mm
Assembly / Installation
- Assembly type:
- BB (solid construction)
Safety / Properties
- Special application:
- on-site mixed concrete
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.22
- Conforms to EN 60670-1
- UV-resistant
Extension piece - 13mm - for junction box
Artikel-No.
9908.68
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Push-on cover with diagonal support option, RAL 9010
Artikel-No.
9909.10
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Push-on cover with central fixing, RAL 9010
Artikel-No.
9909.20
- Conforms to EN 60670-1
- With two isolated and tested centre screws (L=40/70 mm)
- UV-resistant
Waterproof cover
Artikel-No.
9909.03
- with full neoprene seal
- Cover fixing with enclosed screws, non-rusting
Extension piece - 45mm - for junction box
Artikel-No.
9908.68.45
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Flush-mounted junction box - 101mm
Artikel-No.
9908.01
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 145mm
Artikel-No.
9908.01.21
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²
Flush-mounted junction box - 150mm
Artikel-No.
9908.21
- For wood and steel formwork on in-situ concrete and for flush-mounted (masonry) installations
- With internally fitting cover as adhesive attachment surface
- Where fixing to vertical formwork and using adhesive to attach, the box must be mounted on a telescopic support (item no. 9957)
- For loose terminals up to 4 mm²