Company
Service
Media library
News
Career
Contact
KAISER GROUP
Go back
Universal equipment carrier with combination insert
Open Cadenas Modal
  • for use with externally-insulated walls
  • For secure mounting of intercoms, switches, sockets and many more
  • Can be extended in steps of 100 mm using extension element
  • With pre-cut rock wool parts through which the equipment carrier can be fed

Universal equipment carrier for combination inserts for mechanically secure and thermal bridge-free installation in insulated exterior walls, universal equipment carrier for combination inserts made of plastic, with integrated insulation, thermal bridge-free design in accordance with DIN 18015-5, for installation in insulated exterior walls, variable installation of 1 to 3 devices in combination distance of 71 mm, insulation thickness 60-160 mm, adjustable in 10 mm increments, expandable with extension element up to 360 mm, protection class IP 20 according to DIN EN 60529, flame-retardant according to DIN EN 60695 up to 650° C, halogen-free in accordance with DIN VDE 0604-2-100, for installation in insulated facades, for 20 mm/25 mm conduits and NYM cables (3 x 1.5 mm², 5 x 1.5 mm² or 3 x 2.5 mm², 5 x 2.5 mm² or 5 x 7.5 mm², low voltage), with 2 screw domes per device insert
Read more Read less

Universal equipment carrier with combination insert

Kaiser GmbH & Co.KG
Artikel-No.: 1159-26
EAN: 4013456536180
Halogen-free
Product length: 220 mm
Product width: 100 mm
Product depth: 160 mm
For conduit Ø: 25 mm
Min. insulation thickness: 60 mm
Insulation thickness max.: 160 mm
Halogen-free: Yes
Shipping: 5
Price (MSRP) / 100 ST:
€4,780.00
Price group: 180
More product details
Datasheet (PDF)

accessories

- zur Verlängerung des Universal-Geräteträgers um 100 mm einfach durch Aufrasten - reduzierbar in 10-mm-Schritten durch Abschneiden - mit Steinwoll-Zuschnitt zum Ausfüllen des Aufstockelementes
Extension element for universal equipment carrier
Artikel-No. 1159-27
  • to extend the Universal equipment carrier by 100 mm simply by latching on
  • can be reduced in 10 mm steps by cutting
  • with rock wool pre-cut parts to fill the extension panel
See more
- zuverlässiges Abdichten von Elektro-Installationsrohren - ECON®-Technik zur einfachen Leitungsdurchführung - dauerelastischer Kunststoff
Sealing plug ECON® M20
Artikel-No. 1040-20
  • for sealing electrical installation conduits
  • ECON® technology for easy cable entry
  • permanently flexible plastic
See more
- zuverlässiges Abdichten von Elektro-Installationsrohren - ECON®-Technik zur einfachen Leitungsdurchführung - dauerelastischer Kunststoff
Sealing plug ECON® M25
Artikel-No. 1040-25
  • for sealing electrical installation conduits
  • ECON® technology for easy cable entry
  • permanently flexible plastic
See more
- Für Leitungen Ø 4 - 15 mm und Rohre Ø 15 - 110 mm - Überputzbare Vliesmanschette - selbstklebend - 1-teilig
Fleece-butyl sealing sleeve
Artikel-No. 9089-48
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • Fleece-butyl sealing sleeve can be plastered over
  • Self-adhesive.
  • 1-piece
See more
- Für Leitungen Ø 4 - 15 mm und Rohre Ø 15 - 110 mm - Überputzbare Vliesmanschette - selbstklebend - 1-teilig
Fleece-butyl sealing sleeve
Artikel-No. 9089-55
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • Fleece-butyl sealing sleeve can be plastered over
  • Self-adhesive.
  • 1-piece
See more
- Für Leitungen Ø 4 - 15 mm und Rohre Ø 15 - 110 mm - Überputzbare Vliesmanschette - selbstklebend - 1-teilig
Fleece-butyl sealing sleeve
Artikel-No. 9089-49
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • Fleece-butyl sealing sleeve can be plastered over
  • Self-adhesive.
  • 1-piece
See more

tools

- für längere Leitungsstücke integriertes Messer für Längsschnitt - leichtes Arbeiten durch ergonomische Gestaltung - Schneidemesser gehärtet und geschliffen
AMZ 2 stripping pliers
Artikel-No. 1190-02
  • for longer cables: integrated knife for longitudinal cutting
  • ergonomic design - easy-to-use
  • hardened and polished cutting knife
See more

recommendations

- bei Außendämmung von Wänden - zur sicheren Befestigung von Leuchten, Sprechanlagen, Bewegungsmeldern und vielem mehr - erweiterbar durch Aufstockelemente Art.-Nr. 1159-27 um je 100 mm (max. 360 mm) - reduzierbar in 10 mm-Schritten - mit Steinwollzuschnitt zum Ausfüllen des Geräteträgers
Universal equipment carrier
Artikel-No. 1159-24
  • for use with externally-insulated walls
  • for secure fixing of lights, intercoms, motion detectors etc.
  • can be extended in steps of 100 mm each (max. 360 mm) using extension elements Art. No. 1159-27
  • can be reduced in 10 mm steps
  • With pre-cut rock wool parts through which the equipment carrier can be fed
See more
- Anpassung an Dämmstärke in 10 mm Schritten möglich - inklusive 2 Schraubdübel - Isolationsmaterial: Neopor - Verarbeitungstemperatur: -5 °C / + 60 °C
System equipment carrier 160-240 mm with multiple accessory insert for boxes
Artikel-No. 9966.31
  • Adaptation to insulation thickness possible in 10 mm steps
  • Including 2 screw dowels
  • Insulation material: Neopor
  • Processing temperature: -5 °C / + 60 °C
See more

Universal equipment carrier with combination insert

Universal equipment carrier with combination insert for the installation of entryphones and installation accessories on the insulated external facade. The perfect basis for intercoms, sockets, switches and much more, and also for two-unit and three-unit combinations.
  • Guarantees installation without heat bridges
  • For entryphones and variable accessory installation combinations of 1 to 3 units
  • For future expansion without damaging the external facade
  • For insulation thicknesses up to 360 mm

Examples of use

The product is suitable for single, double or triple combinations...
The product is suitable for single, double or triple combinations...
...and also permits future expansion without damage to the facade.
...and also permits future expansion without damage to the facade.
The equipment carrier with combination insert can be...
The equipment carrier with combination insert can be...
...mounted horizontally or vertically.
...mounted horizontally or vertically.

Heat bridge calculation

If installed correctly, heat losses are hardly measurable. Calculation and source: inside: +20°C, outside: -10°C | PASSIV HAUS INSTITUT Dr. W. Feist
Heat bridge calculation
(1) not insulated | (2) insulated

Installation

Define location on the wall and mark it.
Define location on the wall and mark it.
Screw the housing base to the wall.
Screw the housing base to the wall.
If necessary, adjust the extension element to suit the insulation thickness.
If necessary, adjust the extension element to suit the insulation thickness.
Attach the extension element and snap it into place.
Attach the extension element and snap it into place.
Fit the rock wool insulation (supplied).
Fit the rock wool insulation (supplied).
Position the combination insert (mounting clip at bottom) and snap into place.
Position the combination insert (mounting clip at bottom) and snap into place.
The installation can now be fitted and installed.
The installation can now be fitted and installed.
After applying the plaster, attach the desired accessory.
After applying the plaster, attach the desired accessory.

Dimensions / Form

Product length:
220 mm
Product width:
100 mm
Product depth:
160 mm

Connections / Entries

For conduit Ø:
25 mm

Assembly / Installation

Min. insulation thickness:
60 mm
Insulation thickness max.:
160 mm
Assembly type:
ETICS/external insulation

Safety / Properties

Halogen-free:
Yes
Certificate

3D thermal bridge calculation for an equipment carrier

2 MB | 25/02/2014
Download
Universal screw-on surface.
Brochure

Universal screw-on surface.

Electrical installation without drilling and dowelling.

804.2 KB
- zur Verlängerung des Universal-Geräteträgers um 100 mm einfach durch Aufrasten - reduzierbar in 10-mm-Schritten durch Abschneiden - mit Steinwoll-Zuschnitt zum Ausfüllen des Aufstockelementes
Extension element for universal equipment carrier
Artikel-No. 1159-27
  • to extend the Universal equipment carrier by 100 mm simply by latching on
  • can be reduced in 10 mm steps by cutting
  • with rock wool pre-cut parts to fill the extension panel
See more
- zuverlässiges Abdichten von Elektro-Installationsrohren - ECON®-Technik zur einfachen Leitungsdurchführung - dauerelastischer Kunststoff
Sealing plug ECON® M20
Artikel-No. 1040-20
  • for sealing electrical installation conduits
  • ECON® technology for easy cable entry
  • permanently flexible plastic
See more
- zuverlässiges Abdichten von Elektro-Installationsrohren - ECON®-Technik zur einfachen Leitungsdurchführung - dauerelastischer Kunststoff
Sealing plug ECON® M25
Artikel-No. 1040-25
  • for sealing electrical installation conduits
  • ECON® technology for easy cable entry
  • permanently flexible plastic
See more
- Für Leitungen Ø 4 - 15 mm und Rohre Ø 15 - 110 mm - Überputzbare Vliesmanschette - selbstklebend - 1-teilig
Fleece-butyl sealing sleeve
Artikel-No. 9089-48
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • Fleece-butyl sealing sleeve can be plastered over
  • Self-adhesive.
  • 1-piece
See more
- Für Leitungen Ø 4 - 15 mm und Rohre Ø 15 - 110 mm - Überputzbare Vliesmanschette - selbstklebend - 1-teilig
Fleece-butyl sealing sleeve
Artikel-No. 9089-55
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • Fleece-butyl sealing sleeve can be plastered over
  • Self-adhesive.
  • 1-piece
See more
- Für Leitungen Ø 4 - 15 mm und Rohre Ø 15 - 110 mm - Überputzbare Vliesmanschette - selbstklebend - 1-teilig
Fleece-butyl sealing sleeve
Artikel-No. 9089-49
  • For cables Ø 4 - 15 mm and conduits Ø 15 - 110 mm
  • Fleece-butyl sealing sleeve can be plastered over
  • Self-adhesive.
  • 1-piece
See more
- für längere Leitungsstücke integriertes Messer für Längsschnitt - leichtes Arbeiten durch ergonomische Gestaltung - Schneidemesser gehärtet und geschliffen
AMZ 2 stripping pliers
Artikel-No. 1190-02
  • for longer cables: integrated knife for longitudinal cutting
  • ergonomic design - easy-to-use
  • hardened and polished cutting knife
See more
Ausschreiben.de

Ausschreiben.de

Go to tender article
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- bei Außendämmung von Wänden - zur sicheren Befestigung von Leuchten, Sprechanlagen, Bewegungsmeldern und vielem mehr - erweiterbar durch Aufstockelemente Art.-Nr. 1159-27 um je 100 mm (max. 360 mm) - reduzierbar in 10 mm-Schritten - mit Steinwollzuschnitt zum Ausfüllen des Geräteträgers
Universal equipment carrier
Artikel-No. 1159-24
  • for use with externally-insulated walls
  • for secure fixing of lights, intercoms, motion detectors etc.
  • can be extended in steps of 100 mm each (max. 360 mm) using extension elements Art. No. 1159-27
  • can be reduced in 10 mm steps
  • With pre-cut rock wool parts through which the equipment carrier can be fed
See more
- Anpassung an Dämmstärke in 10 mm Schritten möglich - inklusive 2 Schraubdübel - Isolationsmaterial: Neopor - Verarbeitungstemperatur: -5 °C / + 60 °C
System equipment carrier 160-240 mm with multiple accessory insert for boxes
Artikel-No. 9966.31
  • Adaptation to insulation thickness possible in 10 mm steps
  • Including 2 screw dowels
  • Insulation material: Neopor
  • Processing temperature: -5 °C / + 60 °C
See more