Universal installation housing

similar

Universal installation housing with mineral fibreboard cover
Artikel-No. 1297-22
  • two-part, consisting of a rear housing and a front part with a mineral fibreboard insert
  • all-round groove indicates the maximum opening size
  • incl. internal support element to strengthen the housing

Universal installation housing

Universal installation housing for the installation of almost all device types and shapes in concrete walls and ceilings. The housing system consists of nine different installation housings and an extensive range of accessories.
  • For displays, LED lights and much more
  • For installing almost all shapes and sizes
  • For installation in walls or ceilings
  • For in-situ or prefabricated concrete
  • For horizontal or vertical formwork and for masonry

Application example

The concreted-in housing with flush-mounted finish of the mineral fibreboard. The groove in the mineral fibreboard indicates the maximum installation area.
The concreted-in housing with flush-mounted finish of the mineral fibreboard. The groove in the mineral fibreboard indicates the maximum installation area.
The support element in the installation housing prevents it being pressed inward during concreting.
The support element in the installation housing prevents it being pressed inward during concreting.
When attaching the device to the installation housing, use only screws that go into but not right through the mineral fibreboard cover (e.g. SPAX countersunk head screw 3.5 x 15 mm)!
When attaching the device to the installation housing, use only screws that go into but not right through the mineral fibreboard cover (e.g. SPAX countersunk head screw 3.5 x 15 mm)!
The front cover can be easily cut to create virtually any opening shape.
The front cover can be easily cut to create virtually any opening shape.

Note

The indicated wall thicknesses refer to walls without a fire protection function. The following applies to fire protection walls: Remaining wall thickness must be min. 60 mm. When using halogen lamps, pay attention to maximum power (see product details).

Dimensions / Form

Product length:
180 mm
Product width:
180 mm
Product depth:
90 mm
Installation opening (wall/ceiling) length:
120 mm
Installation opening (wall/ceiling) width:
100 mm
Cover for box/housing/casing Ø:
120x100 mm

Connections / Entries

Number of entries:
8

Assembly / Installation

Assembly type:
BB (solid construction)
Wall thickness min.:
120 mm
Wall thickness max.:
120 mm

Safety / Properties

Special application:
on-site mixed concrete
Universal installation housing with mineral fibreboard cover
Artikel-No. 1297-22
  • two-part, consisting of a rear housing and a front part with a mineral fibreboard insert
  • all-round groove indicates the maximum opening size
  • incl. internal support element to strengthen the housing