Go back

UP extension ring

compensation height 50 mm, can be reduced by 3 x 5 mm to 35 mm
Multiple extensions possible
2 x 40 mm ring attachment screws needed, Art. No. 2472-40

ISO extension ring

Name: ISO extension ring
SKU: 1155-02
Price: 400.0 EUR
Availability: InStock

Kaiser GmbH & Co.KG

Artikel-No.: 1155-02

EAN: 4013456414556

Installation opening (wall/ceiling) length: 60 mm

Installation opening (wall/ceiling) width: 60 mm

Cover for box/housing/casing Ø: 60 mm

Halogen-free: Yes

Packaging / Shipping: 10 / 50

Price (MSRP) / 100 ST:

€400.00

Price group: 180

More product details

Datasheet (PDF)

accessories

- selbstformend Ø 3,2 mm
- Senkkopf mit Kombiantrieb PZ1/S
- doppelte Oberflächenveredelung
- korrosionsbeständig nach DIN VDE

Device screw +/-, Length 40 mm

Artikel-No. 2472-40

self-tapping Ø 3.2 mm
Countersunk head with PZ1/S combination drive
surface double-treated
corrosion-resistant in accordance with German DIN VDE standard

tools

- universeller Einsatzbereich
- für mittelhartes Mauerwerk
- hohe Standzeit
- Anschlussgewinde M18 x 1,5
- zum Aufschrauben auf die Staubabsaugung

Diamond grinding head with dust extraction

Artikel-No. 1088-03

Universal area of application
For medium-hard masonry
High service life
Entry thread M18 x 1.5
for screwing onto the dust extraction system

- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5
- Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm

Dust extraction with direct attachment

Artikel-No. 1088-21

for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
Vacuum cleaner hose attachments from Ø 31 - 36 mm

Dust extraction with direct attachment

Artikel-No. 1088-16

for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
Vacuum cleaner hose attachments from Ø 31 - 36 mm

Dust extraction with chuck attachment

Artikel-No. 1088-41

for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
Vacuum cleaner hose attachments from Ø 31 - 36 mm

- universeller Einsatzbereich
- für mittelhartes Mauerwerk
- hohe Standzeit
- Anschlussgewinde M18 x 1,5
- mit Seitenschlitzen
- zum Aufschrauben auf die Direktaufnahme

Diamond grinding head without dust extraction

Artikel-No. 1088-01

Universal area of application
For medium-hard masonry
High service life
Entry thread M18 x 1.5
with side slits
for screwing onto the direct attachment

- zum Aufschrauben auf die Bohrmaschinen-Spindel (Art.-Nr. 1088-15, 1088-20)
- zum Einspannen in das Bohrmaschinenfutter (Art.-Nr. 1088-40)

Direct attachment

Artikel-No. 1088-20

for screwing onto the electric drill spindle (Art. No. 1088-15, 1088-20)
for clamping in the drill chuck (Art. No. 1088-40)

Direct attachment

Artikel-No. 1088-15

for screwing onto the electric drill spindle (Art. No. 1088-15, 1088-20)
for clamping in the drill chuck (Art. No. 1088-40)

Chuck attachment

Artikel-No. 1088-40

for screwing onto the electric drill spindle (Art. No. 1088-15, 1088-20)
for clamping in the drill chuck (Art. No. 1088-40)

Product Information

UP extension ring

UP extension rings for extending existing one-gang boxes or one-gang junction boxes.

For extending existing one-gang boxes
Can be attached on top of existing one-gang boxes and one-gang junction boxes
For securely attaching switches, sockets etc.
Can be extended as required
High torsional strength, and can be combined by means of snap-in connector
Guaranteed standard combination distance of 71 mm

Installation

The existing one-gang box must be fitted flush to the wall and securely anchored. Using 40 mm device screws, screw the ISO extension ring to the existing box. (If necessary, also secure with nails.)

For multiple extensions: break off the nail straps on all additional extension rings and connectors. Fit with an offset of 90° and screw to the last ring.

Every extension ring can be shortened to adapt to the insulation thickness. Fill all cavities in the one-gang box and extension rings with insulating material (no heat bridge created).

Note

Pay attention to expert cable entry and cable length! If necessary, extend cable prior to installation. All cavities in the ISO box set must be completely filled with insulating material in order to prevent heat bridges. Not suitable for internal insulation – please use Art. No. 1159-90 for this purpose!

Technical Data

Dimensions / Form

Installation opening (wall/ceiling) length:: 60 mm
Installation opening (wall/ceiling) width:: 60 mm
Cover for box/housing/casing Ø:: 60 mm

Assembly / Installation

Assembly type:: ETICS/external insulation

Safety / Properties

Halogen-free:: Yes

Brochures/Flyer

Brochure

Energy efficiency.

Electrical installation for energy-saving buildings.

6.1 MB

Languages	de-DE	en-DE	fr-DE
Download (6.1 MB)
Add to cart

Accessoirs

Device screw +/-, Length 40 mm

Artikel-No. 2472-40

self-tapping Ø 3.2 mm
Countersunk head with PZ1/S combination drive
surface double-treated
corrosion-resistant in accordance with German DIN VDE standard

Tools

Diamond grinding head with dust extraction

Artikel-No. 1088-03

Universal area of application
For medium-hard masonry
High service life
Entry thread M18 x 1.5
for screwing onto the dust extraction system

Dust extraction with direct attachment

Artikel-No. 1088-21

for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
Vacuum cleaner hose attachments from Ø 31 - 36 mm

Dust extraction with direct attachment

Artikel-No. 1088-16

for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
Vacuum cleaner hose attachments from Ø 31 - 36 mm

Dust extraction with chuck attachment

Artikel-No. 1088-41

for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
Vacuum cleaner hose attachments from Ø 31 - 36 mm

Diamond grinding head without dust extraction

Artikel-No. 1088-01

Universal area of application
For medium-hard masonry
High service life
Entry thread M18 x 1.5
with side slits
for screwing onto the direct attachment

Direct attachment

Artikel-No. 1088-20

for screwing onto the electric drill spindle (Art. No. 1088-15, 1088-20)
for clamping in the drill chuck (Art. No. 1088-40)

Direct attachment

Artikel-No. 1088-15

for screwing onto the electric drill spindle (Art. No. 1088-15, 1088-20)
for clamping in the drill chuck (Art. No. 1088-40)

Chuck attachment

Artikel-No. 1088-40

for screwing onto the electric drill spindle (Art. No. 1088-15, 1088-20)
for clamping in the drill chuck (Art. No. 1088-40)

Planning Data

PARTcommunity

Planning Data (CAD/3D/2D)