KompaX® 1 concrete installation housing

accessories

KompaX®1 Intermediate frame 25 mm
Artikel-No. 1293-13
  • is clipped between the front and rear part of the KompaX® 1 housing
KompaX®1 Intermediate frame 50 mm
Artikel-No. 1293-14
  • is clipped between the front and rear part of the KompaX® 1 housing
KompaX®1 Front ring ceiling exit Ø 160 mm
Artikel-No. 1293-16
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 165 mm
Artikel-No. 1293-66
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 180 mm
Artikel-No. 1293-18
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 190 mm
Artikel-No. 1293-19
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 200 mm
Artikel-No. 1293-20
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring for ceiling exit Ø 215 mm
Artikel-No. 1293-71
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 front rings for ceiling exit (CE) Ø 300 mm
Artikel-No. 1293-30
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 front rings in facing concrete version Ø 160 mm
Artikel-No. 1293-80
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 front rings in facing concrete version Ø 165 mm
Artikel-No. 1293-81
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 front rings in facing concrete version Ø 180 mm
Artikel-No. 1293-82
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 190 mm
Artikel-No. 1293-83
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 200 mm
Artikel-No. 1293-84
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 215 mm
Artikel-No. 1293-85
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 240 mm
Artikel-No. 1293-86
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 300 mm
Artikel-No. 1293-87
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
Conduit stopper
Artikel-No. 1274-20
  • for luminaire or loudspeaker housings
  • prevents conduits from being inserted too far
  • secures conduit against falling out even under extreme load
  • required opening Ø in the housing tunnel: 21 mm (cut using universal opening cutter Art. No. 1085-80)
Conduit stopper
Artikel-No. 1274-25
  • for luminaire or loudspeaker housings
  • prevents conduits from being inserted too far
  • secures conduit against falling out even under extreme load
  • required opening Ø in the housing tunnel: 21 mm (cut using universal opening cutter Art. No. 1085-80)
Threaded connecting pieces for inch conduits
Artikel-No. 1074-04
  • for insertion of smooth and corrugated 5/8" and 3/4" conduits
  • in 1274-20 and 1274-25 conduit stoppers

KompaX® 1 concrete installation housing

KompaX® 1 housing system for fitted downlights and loudspeakers in concrete ceilings with wide range of accessories for almost all applications. Height-adjustable using intermediate frames. The various front parts make it extremely practical.
  • Housing system for fitted downlights and loudspeakers
  • For in-situ or prefabricated concrete
  • For precise installation openings from Ø 160–300 mm
  • For device installation depths up to 200 mm*
  • For ceiling thicknesses from 180–300 mm*
  • Tolerance compensation during slab ceiling installation

Technical processing instructions/standards

  • for ceiling thicknesses from 18 up to 30 cm. Please contact us if the ceiling thickness is greater than 30 cm.
  • use only certified (EN 60598) luminaires which are suitable for direct installation on normally flammable materials
  • luminaire installation heights up to 200 mm; please contact us for heights greater than 200 mm
  • allows installation of additional lighting or loudspeaker accessories, EIB components, emergency supply units, etc.

Luminaire selection

Built-in installation downlights with TC lamps, lamp output max. 90 W* (e.g. 3 x TC-D 26 W or 2 x TC-T 42 W). Use only built-in luminaires tested to EN 60598-1 suitable for installation on normally flammable building materials. Luminaire installation depth without intermediate frame max. 100 mm. Luminaire installation depth with intermediate frame max. 200 mm. (*Even higher system performance is possible with an intermediate frame)

Note

*For installation depths > 200 mm and ceiling thicknesses > 300 mm, please contact us. Telephone: +49 (0)2355.809.61

Dimensions / Form

Product length:
585 mm
Product width:
440 mm
Product depth:
131 mm

Assembly / Installation

Assembly type:
BB (solid construction)

Safety / Properties

Power consumption in housing LED:
45 W
Instruction

KompaX® 1 and 2

Assembly instructions

1.1 MB | 30/01/2018
KompaX®1 Intermediate frame 25 mm
Artikel-No. 1293-13
  • is clipped between the front and rear part of the KompaX® 1 housing
KompaX®1 Intermediate frame 50 mm
Artikel-No. 1293-14
  • is clipped between the front and rear part of the KompaX® 1 housing
KompaX®1 Front ring ceiling exit Ø 160 mm
Artikel-No. 1293-16
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 165 mm
Artikel-No. 1293-66
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 180 mm
Artikel-No. 1293-18
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 190 mm
Artikel-No. 1293-19
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring ceiling exit Ø 200 mm
Artikel-No. 1293-20
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 Front ring for ceiling exit Ø 215 mm
Artikel-No. 1293-71
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 front rings for ceiling exit (CE) Ø 300 mm
Artikel-No. 1293-30
  • Other dimensions and shapes (for ceiling exit) are available for fast delivery in the form of Styrofoam moulded parts.
KompaX®1 front rings in facing concrete version Ø 160 mm
Artikel-No. 1293-80
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 front rings in facing concrete version Ø 165 mm
Artikel-No. 1293-81
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 front rings in facing concrete version Ø 180 mm
Artikel-No. 1293-82
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 190 mm
Artikel-No. 1293-83
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 200 mm
Artikel-No. 1293-84
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 215 mm
Artikel-No. 1293-85
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 240 mm
Artikel-No. 1293-86
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
KompaX®1 Front ring for ceiling exit (CE) in facing concrete version Ø 300 mm
Artikel-No. 1293-87
  • elastomer seal with flexible sealing edge
  • prevents ingress of concrete, discolouring and sand blast dust
  • for exact flush finishes in facing concrete without additional reworking
Conduit stopper
Artikel-No. 1274-20
  • for luminaire or loudspeaker housings
  • prevents conduits from being inserted too far
  • secures conduit against falling out even under extreme load
  • required opening Ø in the housing tunnel: 21 mm (cut using universal opening cutter Art. No. 1085-80)
Conduit stopper
Artikel-No. 1274-25
  • for luminaire or loudspeaker housings
  • prevents conduits from being inserted too far
  • secures conduit against falling out even under extreme load
  • required opening Ø in the housing tunnel: 21 mm (cut using universal opening cutter Art. No. 1085-80)
Threaded connecting pieces for inch conduits
Artikel-No. 1074-04
  • for insertion of smooth and corrugated 5/8" and 3/4" conduits
  • in 1274-20 and 1274-25 conduit stoppers