KAISER cavity wall equipment and connection boxes ensure safe and practical installation in a wide variety of drywall constructions. The tried-and-tested tab-fastening technology has ensured reliable installation of the boxes within the cladding for many years. A practical design, break-out entries for cables and pipes, and the option to combine and wire through using connecting spouts allow for a wide range of applications. The new O-range® Evo appliance and appliance connection boxes feature an innovative tab-fastening system in which the tab cannot fall behind the cladding. This means the box can be easily removed if necessary and reinstalled without any additional steps. In addition, eight screw-on domes offer flexible mounting options for built-in devices, thereby meeting a wide range of requirements on site. Existing O-range® cavity wall boxes can be combined with the new O-range® Evo products.
Cavity wall installation boxes
Plaster compensation ring for boxes Ø 68 mm, Height 10 mm
Product Ø:
68 mm
Product depth:
10 mm
Pkg. inner / Pkg. outer:
25 / 250
Price group:
120
recommendations
One-gang box O-range® Evo, Depth 49 mm
Article No.
9063-03
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang junction box O-range® Evo, Depth 62 mm
Article No.
9064-03
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range ECON® Evo, airtight, Depth 49 mm
Article No.
9263-23
- Airtight design with sealing membranes
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Toolless cable or conduit entries
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang junction box O-range ECON® Evo, air-tight, Depth 62 mm
Article No.
9264-23
- Elastic sealing membrane for guaranteed air-tightness
- Toolless cable and conduit entry
- Air-tight combined with support connector
- In addition, for products in the O-range ECON® Evo series:
- Captive fixing lug for easy removal and reinstallation
- 8 screw domes for maximum flexibility when mounting equipment
similar
Plaster compensation ring for boxes Ø 68 mm, Height 20 mm
Article No.
9155-64
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Plaster compensation ring for boxes Ø 74 mm, Height 12 mm
Article No.
9155-71
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Plaster compensation ring for boxes Ø 74 mm, Height 24 mm
Article No.
9155-72
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Cavity wall installation boxes
Technical processing instructions / Standards
- In accordance with DIN EN 60670
- Standardised combination distance 71 mm
- Fully-insulated through-wiring in combinations of one-gang boxes and one-gang junction boxes for switches and sockets possible
- With holding ring
- break-out openings for sheathed cabling, low-voltage wires and DIN EN conduits
- Integrated retention of NYM cables in accordance with DIN EN 60670/DIN 49073, self-locking of the conduits
- Can also be used as junction box in accordance with DIN EN 60670
Dimensions / Form
- Product Ø:
- 68 mm
- Product depth:
- 10 mm
- Plaster levelling ring for box/housing:
- 68 mm
Assembly / Installation
- Assembly type:
- HW (drywall/lightweight construction)
- Screw spacing:
- 60 mm
One-gang box O-range® Evo, Depth 49 mm
Article No.
9063-03
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang junction box O-range® Evo, Depth 62 mm
Article No.
9064-03
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range ECON® Evo, airtight, Depth 49 mm
Article No.
9263-23
- Airtight design with sealing membranes
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Toolless cable or conduit entries
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang junction box O-range ECON® Evo, air-tight, Depth 62 mm
Article No.
9264-23
- Elastic sealing membrane for guaranteed air-tightness
- Toolless cable and conduit entry
- Air-tight combined with support connector
- In addition, for products in the O-range ECON® Evo series:
- Captive fixing lug for easy removal and reinstallation
- 8 screw domes for maximum flexibility when mounting equipment
Plaster compensation ring for boxes Ø 68 mm, Height 20 mm
Article No.
9155-64
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Plaster compensation ring for boxes Ø 74 mm, Height 12 mm
Article No.
9155-71
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Plaster compensation ring for boxes Ø 74 mm, Height 24 mm
Article No.
9155-72
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws