KAISER cavity wall equipment and connection boxes ensure safe and practical installation in a wide variety of drywall constructions. The tried-and-tested tab-fastening technology has ensured reliable installation of the boxes within the cladding for many years. A practical design, break-out entries for cables and pipes, and the option to combine and wire through using connecting spouts allow for a wide range of applications. The new O-range® Evo appliance and appliance connection boxes feature an innovative tab-fastening system in which the tab cannot fall behind the cladding. This means the box can be easily removed if necessary and reinstalled without any additional steps. In addition, eight screw-on domes offer flexible mounting options for built-in devices, thereby meeting a wide range of requirements on site. Existing O-range® cavity wall boxes can be combined with the new O-range® Evo products.
Cavity wall installation boxes
One-gang box O-range® Evo, Depth 49 mm
Product depth:
49 mm
Material:
Plastic PP
Type of entry:
electric cable, conduit
Number of entries:
8
Number of through-wiring fields/openings:
2
For conduit Ø:
20 mm, 25 mm
Wire entry Ø min.:
8 mm
Wire entry Ø max.:
11 mm
Wire entry for number of cores and nominal conductor cross-section (mm²) when using NYM:
3x1.5, 3x2.5, 5x1.5
Type of entry:
break-out opening
Design:
Device box
Design:
1-fold
combination distance:
71 mm
Room boundary type:
wall
Installation opening (for devices) Ø max.:
60 mm
Min. panel thickness:
7 mm
Panel thickness max.:
40 mm
Drill/cut hole Ø:
68 mm
Protection class:
IP3X
Glow wire test:
850° C
Pkg. inner / Pkg. outer:
25 / 250
Price group:
110
accessories
Plaster compensation ring for boxes Ø 68 mm, Height 10 mm
Article No.
9155-63
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Plaster compensation ring for boxes Ø 68 mm, Height 20 mm
Article No.
9155-64
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Universal VDE cover
Article No.
1184-90
- for all one-gang, one-gang junction and junction boxes
- with central exit for light hook
- flat cover edge
- surface roughened
Compensation ring up to max. Ø 71 mm
Article No.
9060-40
- for all Ø 68 mm cavity wall boxes
- for oversize drill holes
- can also be used for combinations where the formed surfaces are located next to each other
Support connector, air tight
Article No.
9060-98
- For fully insulated through-wiring in combinations
- to make air-tight combinations
- For all boxes with a round spout opening
Internal cover
Article No.
1158-90
- for flush closure of one-gang boxes and one-gang junction boxes
- suitable for wallpapering
- for all one-gang boxes and one-gang junction boxes with Ø 68 mm
tools
PROFI cutter Ø 68 mm with countersink hole cutter, holder, centering drill
Article No.
1081-10
- high cutting power
- precise cut for circular drilled holes
- high radial runout accuracy
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
EXPERT carbide cutter Ø 68 mm with countersink hole cutter, holder, centering drill
Article No.
1082-30
- Carbide tipped cutter head and countersink hole cutter
- extremely powerful
- very long operating life
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
Cavity wall box template
Article No.
1085-99
- for marking cutting-out distances for boxes combinations
- standard combination distance 71 mm to German DIN 49 075 as well as 91 mm distance for separate covers for low-voltage equipment
PROFI cutter head Ø 68 mm with ejector spring
Article No.
1081-11
- high cutting power
- precise cut for circular drilled holes
- high radial runout accuracy
PROFI countersink hole cutter Ø 68 mm for flush-mounting box installation
Article No.
1081-15
- for flush-mounting box and casing installation
- inductively hardened
EXPERT carbide cutter head Ø 68 mm with ejector spring
Article No.
1082-31
- carbide tipped
- extremely powerful
- very long operating life
EXPERT carbide countersink hole cutter Ø 68 mm for flush-mounting box installation
Article No.
1082-35
- carbide tipped
- for flush-mounting box and casing installation
Collet Ø 12 mm for PROFI and EXPERT cutter heads, connection thread 5/8"
Article No.
1083-40
- with centering drill Ø 6 mm
- for all PROFI, EXPERT and BASIC cavity wall cutters
Collet Ø 10 mm for PROFI and EXPERT cutter heads, connection thread 5/8"
Article No.
1083-41
- with centering drill Ø 6 mm
- for all PROFI, EXPERT and BASIC cavity wall cutters
recommendations
One-gang junction box O-range® Evo, Depth 62 mm
Article No.
9064-03
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
similar
One-gang box O-range® Evo, Depth 49 mm, halogen-free
Article No.
9063-79
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range® Evo for thin boardings, depth 41 mm
Article No.
9063-13
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range® Evo for thin boardings, Depth 49 mm, halogen-free
Article No.
9063-73
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
Cavity wall installation boxes
Technical processing instructions / Standards
- In accordance with DIN EN 60670
- Standardised combination distance 71 mm
- Fully-insulated through-wiring in combinations of one-gang boxes and one-gang junction boxes for switches and sockets possible
- With holding ring
- break-out openings for sheathed cabling, low-voltage wires and DIN EN conduits
- Integrated retention of NYM cables in accordance with DIN EN 60670/DIN 49073, self-locking of the conduits
- Can also be used as junction box in accordance with DIN EN 60670
Dimensions / Form
- Product depth:
- 49 mm
- combination distance:
- 71 mm
- Installation opening (for devices) Ø max.:
- 60 mm
- Drill/cut hole Ø:
- 68 mm
- Shape:
- round
Connections / Entries
- Type of entry:
- electric cable, conduit
- Number of entries:
- 8
- Number of through-wiring fields/openings:
- 2
- For conduit Ø:
- 20 mm, 25 mm
- Wire entry Ø min.:
- 8 mm
- Wire entry Ø max.:
- 11 mm
- Wire entry for number of cores and nominal conductor cross-section (mm²) when using NYM:
- 3x1.5, 3x2.5, 5x1.5
- Type of entry:
- break-out opening
Assembly / Installation
- Room boundary type:
- wall
- Min. panel thickness:
- 7 mm
- Panel thickness max.:
- 40 mm
- Assembly type:
- HW (drywall/lightweight construction)
- Installation:
- Horizontal / Vertical
- Device fastening in/on box/housing:
- Screw attachment
Features
- Design:
- Device box
- Design:
- 1-fold
- Expandability/Combinability:
- Yes
- Integrated accessories:
- with device screws
- Optional accessories:
- Cover, Finish compensation
- Number of screw domes:
- 8
Material / Colour
- Material:
- Plastic PP
Electrical Properties
- Rated insulation voltage:
- 400 V
Approvals / Certifications
- Protection class:
- IP3X
- Glow wire test:
- 850° C
- VDE:
- Yes
Plaster compensation ring for boxes Ø 68 mm, Height 10 mm
Article No.
9155-63
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Plaster compensation ring for boxes Ø 68 mm, Height 20 mm
Article No.
9155-64
- to compensate for deep-seated boxes
- plaster compensation rings with same diameter can be stacked
- with 2 ring fixing screws
Universal VDE cover
Article No.
1184-90
- for all one-gang, one-gang junction and junction boxes
- with central exit for light hook
- flat cover edge
- surface roughened
Compensation ring up to max. Ø 71 mm
Article No.
9060-40
- for all Ø 68 mm cavity wall boxes
- for oversize drill holes
- can also be used for combinations where the formed surfaces are located next to each other
Support connector, air tight
Article No.
9060-98
- For fully insulated through-wiring in combinations
- to make air-tight combinations
- For all boxes with a round spout opening
Internal cover
Article No.
1158-90
- for flush closure of one-gang boxes and one-gang junction boxes
- suitable for wallpapering
- for all one-gang boxes and one-gang junction boxes with Ø 68 mm
PROFI cutter Ø 68 mm with countersink hole cutter, holder, centering drill
Article No.
1081-10
- high cutting power
- precise cut for circular drilled holes
- high radial runout accuracy
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
EXPERT carbide cutter Ø 68 mm with countersink hole cutter, holder, centering drill
Article No.
1082-30
- Carbide tipped cutter head and countersink hole cutter
- extremely powerful
- very long operating life
- Removable countersink hole cutter
- Fits all electric drills with 13 mm chuck
Cavity wall box template
Article No.
1085-99
- for marking cutting-out distances for boxes combinations
- standard combination distance 71 mm to German DIN 49 075 as well as 91 mm distance for separate covers for low-voltage equipment
PROFI cutter head Ø 68 mm with ejector spring
Article No.
1081-11
- high cutting power
- precise cut for circular drilled holes
- high radial runout accuracy
PROFI countersink hole cutter Ø 68 mm for flush-mounting box installation
Article No.
1081-15
- for flush-mounting box and casing installation
- inductively hardened
EXPERT carbide cutter head Ø 68 mm with ejector spring
Article No.
1082-31
- carbide tipped
- extremely powerful
- very long operating life
EXPERT carbide countersink hole cutter Ø 68 mm for flush-mounting box installation
Article No.
1082-35
- carbide tipped
- for flush-mounting box and casing installation
Collet Ø 12 mm for PROFI and EXPERT cutter heads, connection thread 5/8"
Article No.
1083-40
- with centering drill Ø 6 mm
- for all PROFI, EXPERT and BASIC cavity wall cutters
Collet Ø 10 mm for PROFI and EXPERT cutter heads, connection thread 5/8"
Article No.
1083-41
- with centering drill Ø 6 mm
- for all PROFI, EXPERT and BASIC cavity wall cutters
One-gang junction box O-range® Evo, Depth 62 mm
Article No.
9064-03
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range® Evo, Depth 49 mm, halogen-free
Article No.
9063-79
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range® Evo for thin boardings, depth 41 mm
Article No.
9063-13
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit
One-gang box O-range® Evo for thin boardings, Depth 49 mm, halogen-free
Article No.
9063-73
- Screws ensure permanent fixing
- Non-detachable strap for easy removal and refitting without any additional steps
- 8 screw domes for maximum flexibility when mounting equipment
- 90° conduit entry angle for convenient installation in pipe installations
- Entries can be broken out for cables and conduits
- Integrated cable retention of the NYM cable, self-locking of the conduit