Company
Service
Media library
News
Career
Contact
KAISER GROUP
Go back
Electronics box UP¹ ECON® Fix and two-gang junction box UP¹ ECON® Fix
Open Cadenas Modal
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm

Two-gang junction box, air-tight with multi-membrane for flush-mounting/masonry installation, flush-mounting box, designed as a flush-mounting two-gang junction box in accordance with DIN EN 60670/VDE 0606 and DIN 49073, made of plastic, air-tight design in accordance with DIN 18015-5.
Installation opening 2x Ø 60 mm, installation opening 152 mm x 82 mm, depth 68 mm, combination distance 71 mm, with fixing for installation without plaster, protection class IP 20 according to DIN EN 60529, flame retardant according to DIN EN 60695 up to 650° C, halogen-free in accordance with DIN VDE 0604-2-100, for flush-mounting installation.
Toolless wire entries for cables and DIN EN conduits with diameters of 20/25/32 (3 x 20 mm/25 mm and 3 wire entries in the combination areas, 2x 32 mm, 3 x 20 mm/25 mm in the side wall, as well as 8 segmented entries for up to 4 wire entries each for NYM cables 3 x 1.5 mm², 3 x 2.5 mm² or 5 x 1.5 mm², 5 x 2.5 mm² or 7 x 1.5 mm², 2x 25 mm and 4 wire entries in the box base,
open through-wiring, fully insulated through-wiring close to the base, with 6x3 screw domes, with 4 device screws
Read more Read less

UP¹ ECON® Fix two-gang junction box

Unbekannt
Artikel-No.: 1656-26
EAN: 4013456590335
air tightness
Halogen-free
VDE
Product length: 149 mm
Product width: 80 mm
Product depth: 68 mm
Installation opening (wall/ceiling) Ø: 2x82 mm
Number of entries: 17
For conduit Ø: 25 mm, 32 mm
Wire entry Ø max.: 11 mm
air tightness: Yes
Halogen-free: Yes
Packaging / Shipping: 10 / 100
Price (MSRP) / 100 ST:
€1,075.00
Price group: 121
More product details
Datasheet (PDF)

accessories

- Mehrmals zu verwenden - Schützen das Doseninnere, die Schraubdome und Schraubenköpfe beim Verputzen
Signal cover UP¹ for installation openings Ø 2x60 mm
Artikel-No. 1181-16
  • Reusable
  • Protects interior of box, screwing dome and screw heads when plastering
See more
- Für die zusätzliche Fixierung der UP¹ ECON® Fix Dosen - Zur Verarbeitung mit handelsüblichen PU-Schaumpistolen mit M65 Gewindeanschluss - Verwendbar mit Art.-Nr. 1055-26, 1555-26, 1068-26 und 1656-26 - 1-K PU-Schaum - Baustoffklasse E nach EN 13501 (DIN 4102 B2-Qualität) - Feinporige Schaumstruktur - Verarbeitungstemperatur Umgebung -10 °C bis +30°, optimal +20°C, 60% relative Luftfeuchtigkeit (Dosentemperatur mind. +5°C) - Feuchtigkeitshärtend - Klebefrei innerhalb von ca. 10 min - Schneidbar nach ca. 30 min. - Voll belastbar nach ca. 12 h - Temperaturbeständig ausgehärtet von -40 °C bis +80 °C - Lagerfähig bis zu 12 Monate - Bitte Sicherheitsdatenblatt beachten
Flush-mounting gun foam
Artikel-No. 1155-95
  • For additional fixing of the UP¹ ECON® Fix boxes
  • For processing with commercially available PU foam guns with M65 threaded connection
  • Can be used with Art. No. 1055-26, 1555-26, 1068-26 and 1656-26
  • 1-component PU foam
  • Building material class E according to EN 13501 (DIN 4102 B2 quality)
  • Fine-pored foam structure
  • Ambient processing temperature -10°C to +30°C, optimum +20°C, 60% relative humidity (box temperature min. +5°C)
  • Humidity curing
  • Adhesive-free within approx. 10 min
  • Can be cut after approx. 30 min.
  • Fully loadable after approx. 12 h
  • Temperature resistant cured from -40 °C to +80 °C
  • Can be stored up to 12 months
  • Please note the safety data sheet
See more

tools

- 2 Libellen zum senkrechten und waagerechten Ausrichten - 71 mm für Norm-Kombinationen - 91 mm für getrennte Abdeckungen von Kleinspannungsgeräten - mit gehärteten Bohrbuchsen Ø 6 mm - mit ausklappbarem Führungsstift für die erste Bohrung
Drilling template
Artikel-No. 1190-65
  • 2 spirit levels for vertical and horizontal alignment
  • 71 mm for standard combinations
  • 91 mm for separate covers on low-voltage equipment
  • with hardened drilling bushes Ø 6 mm
  • with fold-out guide pin for first drill hole
See more
- universeller Einsatzbereich - für mittelhartes Mauerwerk - hohe Standzeit - Anschlussgewinde M18 x 1,5 - mit Seitenschlitzen - zum Aufschrauben auf die Direktaufnahme
Diamond grinding head without dust extraction
Artikel-No. 1088-00
  • Universal area of application
  • For medium-hard masonry
  • High service life
  • Entry thread M18 x 1.5
  • with side slits
  • for screwing onto the direct attachment
See more
- universeller Einsatzbereich - für mittelhartes Mauerwerk - hohe Standzeit - Anschlussgewinde M18 x 1,5 - zum Aufschrauben auf die Staubabsaugung
Diamond grinding head with dust extraction
Artikel-No. 1088-02
  • Universal area of application
  • For medium-hard masonry
  • High service life
  • Entry thread M18 x 1.5
  • for screwing onto the dust extraction system
See more
- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5 - Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm
Dust extraction with direct attachment
Artikel-No. 1088-21
  • for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
  • Vacuum cleaner hose attachments from Ø 31 - 36 mm
See more
- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5 - Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm
Dust extraction with direct attachment
Artikel-No. 1088-16
  • for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
  • Vacuum cleaner hose attachments from Ø 31 - 36 mm
See more
- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5 - Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm
Dust extraction with chuck attachment
Artikel-No. 1088-41
  • for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
  • Vacuum cleaner hose attachments from Ø 31 - 36 mm
See more

recommendations

- Mit Schnellfixierung für die Montage ohne Gips - Mit 4 x 3 Schraubdomen - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix electronics box
Artikel-No. 1068-26
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more
- Variante zum klassischen Setzen mit Gips - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Mit 4 x 3 Schraubdomen - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix one-gang box
Artikel-No. 1055-26
  • More volume than conventional one-gang boxes
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more
- Variante zum klassischen Setzen mit Gips - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Mit 4 x 3 Schraubdomen und 2 Spreizkrallenfeldern - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix one-gang junction box
Artikel-No. 1555-26
See more
- Zum Ausgleich zu tief sitzender Dosen - Zur Einhaltung der IP-Schutzart - Mit 2 Befestigungsschrauben 40 mm - Kompatibilität bei Installation von großen Einbaugeräten prüfen
UP¹ Fix stepless plaster compensation frame
Artikel-No. 1155-65
  • To compensate for deep-seated boxes
  • To maintain IP protection class
  • With 2 fixing screws 40 mm
  • Check compatibility when installing large built-in appliances
See more
- Mehrmals zu verwenden - Schützen das Doseninnere, die Schraubdome und Schraubenköpfe beim Verputzen
Signal cover UP¹ for installation openings Ø 60 mm
Artikel-No. 1181-65
  • Reusable
  • Protects interior of box, screwing dome and screw heads when plastering
See more
- Für das Verlegen von Leitungen oder Rohr ohne Gips - Schnelle Fixierung in Mauerschlitzen von 20 bis 55 mm - Verkürzung der Montagezeit - Keine Beschädigung der Leitungen - Optional: Verwendung von Stahlnägeln Ø 3 mm
Wall groove clip
Artikel-No. 1159-95
  • For laying cables or conduits without plaster
  • Quick fixation in wall grooves from 20 to 55 mm
  • Reduction of assembly time
  • No damage to the cables
  • Optional: use of steel nails Ø 3 mm
See more

similar

- Mit Schnellfixierung für die Montage ohne Gips - Mit 4 x 3 Schraubdomen - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix electronics box
Artikel-No. 1068-26
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more

Electronics box UP¹ ECON® Fix and two-gang junction box UP¹ ECON® Fix

The electronic box UP¹ ECON® Fix and double one-gang junction box UP¹ ECON® Fix extend the new UP¹ family. The electronics box UP¹ ECON® Fix provides a generously-sized accessory installation space and additional space for fitting small switch actuators, etc. The matching separator wall allows the standardised installation of bus and operating voltage in one box. The two-gang junction box UP¹ ECON® Fix makes it easier than ever to install special accessories. The large installation opening and the very large installation compartment make it possible to install block and pre-wired accessories, and they create space for the assembly of cables for multi-media connections.
  • With quick fixing for installation without plaster
  • Elastic sealing membrane for guaranteed air-tightness
  • Variable and tool-free insertion of cables and DIN EN conduits up to 32 mm
  • Additional space for decentral installation of KNX / LON UP actuators, flush-mounted cut-off relays for Venetian blinds, and many more
  • Separator wall for standardised fitting of two voltage types in one box
  • Maintenance of cable bending radii for network connection boxes – optimal data transfer
  • Easy installation of pre-wired accessories and multi-media connection boxes

Examples of applications for the ECON® UP¹ electronics box

By inserting the separator wall, two different voltage types can be fitted in a standardised way in the electronics box. In addition, they provide a generously-sized installation space…
By inserting the separator wall, two different voltage types can be fitted in a standardised way in the electronics box. In addition, they provide a generously-sized installation space…
...for the decentral installation of, for example, small window actuators for controlling Venetian blinds and heating in the outer wall.
...for the decentral installation of, for example, small window actuators for controlling Venetian blinds and heating in the outer wall.
Thanks to the electronics box, it is easy to install radio-controlled actuators, etc., without putting excessive strain on cables or accessories.
Thanks to the electronics box, it is easy to install radio-controlled actuators, etc., without putting excessive strain on cables or accessories.
Network connection boxes can be used while maintaining the cable bending radii and with the best possible data transfer speeds.
Network connection boxes can be used while maintaining the cable bending radii and with the best possible data transfer speeds.

Examples of applications for the ECON® UP¹ two-gang junction box

Thanks to its large installation opening without a central bridge, the two-gang junction box allows…
Thanks to its large installation opening without a central bridge, the two-gang junction box allows…
…the use of pre-wired accessories, block inserts, and many more.
…the use of pre-wired accessories, block inserts, and many more.
It also provides an easy-to-use basis for the installation of multi-media connection boxes. The very large installation compartment has plenty of space for cable assembly.
It also provides an easy-to-use basis for the installation of multi-media connection boxes. The very large installation compartment has plenty of space for cable assembly.
Cable reserves and connection plugs can easily be inserted into the box and are then concealed behind the installation accessories.
Cable reserves and connection plugs can easily be inserted into the box and are then concealed behind the installation accessories.

Processing instructions

The permanently elastic sealing membrane used in ECON® technology guarantees the airtight connection of cables up to Ø 11 mm, and conduits up to Ø 32 mm.
The permanently elastic sealing membrane used in ECON® technology guarantees the airtight connection of cables up to Ø 11 mm, and conduits up to Ø 32 mm.
Two ECON® multi-membrane entries up to M32 enable the insertion of prefabricated cables with connectors such as HDMI.
Two ECON® multi-membrane entries up to M32 enable the insertion of prefabricated cables with connectors such as HDMI.
The sealing membrane fits tightly around the cable or conduit and permanently prevents leakage in outer walls and in inner walls next to outer walls.
The sealing membrane fits tightly around the cable or conduit and permanently prevents leakage in outer walls and in inner walls next to outer walls.
The peripheral sealing lip between the box body and the front part ensures an air-tight connection i.e. retention of the building's air-tight seal.
The peripheral sealing lip between the box body and the front part ensures an air-tight connection i.e. retention of the building's air-tight seal.

Dimensions / Form

Product length:
149 mm
Product width:
80 mm
Product depth:
68 mm
Installation opening (wall/ceiling) Ø:
2x82 mm

Connections / Entries

Number of entries:
17
For conduit Ø:
25 mm, 32 mm
Wire entry Ø max.:
11 mm

Assembly / Installation

Assembly type:
UP (solid construction)

Safety / Properties

air tightness:
Yes
Halogen-free:
Yes

Features

Number of screw domes:
4 x 3

Approvals / Certifications

VDE:
Yes
Technical information

Sicherheitsdatenblatt UP-Pistolenschaum (Art.-Nr. 1155-95)

289.1 KB | 02/01/2023
Download
Certificate

UP¹ flush-mounting boxes – sustainability certification

2.5 MB | 09/03/2026
Download
Certificate

BlowerDoor Certificate - UP¹ ECON® electronics box and UP¹ ECON® two-gang junction box (Art. No. 1068-26, 1656-26)

77.2 KB | 16/07/2024
Instruction

UP¹ ECON® Fix

Assembly instructions

3.5 MB | 29/11/2024
Download
Our UP¹ family
Flyer

Our UP¹ family

Designed by craftsmen, made by KAISER.

630.7 KB
UP1. Our best UP flush-mounting box.
Brochure

UP1. Our best UP flush-mounting box.

The new flush-mounting programme.

1.2 MB
Innovations 2026
Brochure

Innovations 2026

Designed by craftsmen, made by KAISER!

4.5 MB
- Mehrmals zu verwenden - Schützen das Doseninnere, die Schraubdome und Schraubenköpfe beim Verputzen
Signal cover UP¹ for installation openings Ø 2x60 mm
Artikel-No. 1181-16
  • Reusable
  • Protects interior of box, screwing dome and screw heads when plastering
See more
- Für die zusätzliche Fixierung der UP¹ ECON® Fix Dosen - Zur Verarbeitung mit handelsüblichen PU-Schaumpistolen mit M65 Gewindeanschluss - Verwendbar mit Art.-Nr. 1055-26, 1555-26, 1068-26 und 1656-26 - 1-K PU-Schaum - Baustoffklasse E nach EN 13501 (DIN 4102 B2-Qualität) - Feinporige Schaumstruktur - Verarbeitungstemperatur Umgebung -10 °C bis +30°, optimal +20°C, 60% relative Luftfeuchtigkeit (Dosentemperatur mind. +5°C) - Feuchtigkeitshärtend - Klebefrei innerhalb von ca. 10 min - Schneidbar nach ca. 30 min. - Voll belastbar nach ca. 12 h - Temperaturbeständig ausgehärtet von -40 °C bis +80 °C - Lagerfähig bis zu 12 Monate - Bitte Sicherheitsdatenblatt beachten
Flush-mounting gun foam
Artikel-No. 1155-95
  • For additional fixing of the UP¹ ECON® Fix boxes
  • For processing with commercially available PU foam guns with M65 threaded connection
  • Can be used with Art. No. 1055-26, 1555-26, 1068-26 and 1656-26
  • 1-component PU foam
  • Building material class E according to EN 13501 (DIN 4102 B2 quality)
  • Fine-pored foam structure
  • Ambient processing temperature -10°C to +30°C, optimum +20°C, 60% relative humidity (box temperature min. +5°C)
  • Humidity curing
  • Adhesive-free within approx. 10 min
  • Can be cut after approx. 30 min.
  • Fully loadable after approx. 12 h
  • Temperature resistant cured from -40 °C to +80 °C
  • Can be stored up to 12 months
  • Please note the safety data sheet
See more
- 2 Libellen zum senkrechten und waagerechten Ausrichten - 71 mm für Norm-Kombinationen - 91 mm für getrennte Abdeckungen von Kleinspannungsgeräten - mit gehärteten Bohrbuchsen Ø 6 mm - mit ausklappbarem Führungsstift für die erste Bohrung
Drilling template
Artikel-No. 1190-65
  • 2 spirit levels for vertical and horizontal alignment
  • 71 mm for standard combinations
  • 91 mm for separate covers on low-voltage equipment
  • with hardened drilling bushes Ø 6 mm
  • with fold-out guide pin for first drill hole
See more
- universeller Einsatzbereich - für mittelhartes Mauerwerk - hohe Standzeit - Anschlussgewinde M18 x 1,5 - mit Seitenschlitzen - zum Aufschrauben auf die Direktaufnahme
Diamond grinding head without dust extraction
Artikel-No. 1088-00
  • Universal area of application
  • For medium-hard masonry
  • High service life
  • Entry thread M18 x 1.5
  • with side slits
  • for screwing onto the direct attachment
See more
- universeller Einsatzbereich - für mittelhartes Mauerwerk - hohe Standzeit - Anschlussgewinde M18 x 1,5 - zum Aufschrauben auf die Staubabsaugung
Diamond grinding head with dust extraction
Artikel-No. 1088-02
  • Universal area of application
  • For medium-hard masonry
  • High service life
  • Entry thread M18 x 1.5
  • for screwing onto the dust extraction system
See more
- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5 - Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm
Dust extraction with direct attachment
Artikel-No. 1088-21
  • for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
  • Vacuum cleaner hose attachments from Ø 31 - 36 mm
See more
- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5 - Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm
Dust extraction with direct attachment
Artikel-No. 1088-16
  • for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
  • Vacuum cleaner hose attachments from Ø 31 - 36 mm
See more
- für Diamant-Schleifkronen Ø 82 oder Ø 68 mm mit Anschlussgewinde M18x1,5 - Staubsauger-Schlauchaufnahme von Ø 31 - 36 mm
Dust extraction with chuck attachment
Artikel-No. 1088-41
  • for diamond grinding heads Ø 82 or Ø 68 mm with connection thread M18x1.5
  • Vacuum cleaner hose attachments from Ø 31 - 36 mm
See more
Ausschreiben.de

Ausschreiben.de

Go to tender article
PARTcommunity

PARTcommunity

Planning Data (CAD/3D/2D)
- Mit Schnellfixierung für die Montage ohne Gips - Mit 4 x 3 Schraubdomen - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix electronics box
Artikel-No. 1068-26
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more
- Variante zum klassischen Setzen mit Gips - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Mit 4 x 3 Schraubdomen - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix one-gang box
Artikel-No. 1055-26
  • More volume than conventional one-gang boxes
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more
- Variante zum klassischen Setzen mit Gips - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Mit 4 x 3 Schraubdomen und 2 Spreizkrallenfeldern - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix one-gang junction box
Artikel-No. 1555-26
See more
- Zum Ausgleich zu tief sitzender Dosen - Zur Einhaltung der IP-Schutzart - Mit 2 Befestigungsschrauben 40 mm - Kompatibilität bei Installation von großen Einbaugeräten prüfen
UP¹ Fix stepless plaster compensation frame
Artikel-No. 1155-65
  • To compensate for deep-seated boxes
  • To maintain IP protection class
  • With 2 fixing screws 40 mm
  • Check compatibility when installing large built-in appliances
See more
- Mehrmals zu verwenden - Schützen das Doseninnere, die Schraubdome und Schraubenköpfe beim Verputzen
Signal cover UP¹ for installation openings Ø 60 mm
Artikel-No. 1181-65
  • Reusable
  • Protects interior of box, screwing dome and screw heads when plastering
See more
- Für das Verlegen von Leitungen oder Rohr ohne Gips - Schnelle Fixierung in Mauerschlitzen von 20 bis 55 mm - Verkürzung der Montagezeit - Keine Beschädigung der Leitungen - Optional: Verwendung von Stahlnägeln Ø 3 mm
Wall groove clip
Artikel-No. 1159-95
  • For laying cables or conduits without plaster
  • Quick fixation in wall grooves from 20 to 55 mm
  • Reduction of assembly time
  • No damage to the cables
  • Optional: use of steel nails Ø 3 mm
See more
- Mit Schnellfixierung für die Montage ohne Gips - Mit 4 x 3 Schraubdomen - Seitenneutrale Kombination - Vielfältige Durchverdrahtung - Norm-Kombinationsabstand 71 mm
UP¹ ECON® Fix electronics box
Artikel-No. 1068-26
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
See more